Custom venturi's

There are quite a few people that do custom work of one sort or another for the hobby that we do. I just had a BUNCH of venturi's done for me by Scott Riese. Have to say that these were done in a most excellent manner. Scott did venturi's for my OS 49,50,58 and Veco 61's. These were out of aluminum and are just outstanding! Give him a try!

Bill

Scott does nice work, but don't tell him I said that. His head's big enough already.

WHAT??????Randy shame....Bad, Bad Randy...go to your room

Thank you for the nice post I try to do the best for everyone. I also have Fuel Pumps 1/4oz per stroke. Most of what I do is for the Beginner that can't find things. Nuts and Bolts, I carry them 10 for a $1. I show how to do tanks, push rods, line ends, engine crutches and How to re-work the Fox 35. I do lines for $5 for Club Members and I do some Custom Mufflers.
BEFORE anyone starts sending me things...VENTURI'S are the main ticket at my shop. My business is Called TYME (Test your model equipment) I also do new products non-destructive testing. I just received some carbon fiber props that I’ll put through the whole testing mode. I started yesterday on a Three Blade prop a 10x4. So far this is the BEST 10x4 I’ve ever used. I’m running it on an OS-32F. The Torpedo 10x4 at $4 is a better deal. However, you can’t find them. This 10x4 has all of the properties that I like. Thrust overhead, better engine run Because of the governing effect. More will come as I move up to the PA-61. Wendy U say’s these props are the cats meow. TYME will tell.

Scott(venturi's are good)Riese

You might want to try Byron Barker of C. F. Slattery in New Albany, IN. His email is [email protected]. Call him during the day at 812-948-9167 or at home at 812-944-8511.

Scott,

What? I said you did good work and you do. Also, you're dragging new blood into the event. Also a good thing.

>WHAT??????Randy shame....Bad, Bad Randy...go to your room
>
>Thank you for the nice post I try to do the best for
>everyone. I also have Fuel Pumps 1/4oz per stroke. Most of
>what I do is for the Beginner that can't find things. Nuts
>and Bolts, I carry them 10 for a $1. I show how to do tanks,
>push rods, line ends, engine crutches and How to re-work the
>Fox 35. I do lines for $5 for Club Members and I do some
>Custom Mufflers.
>>
>Scott(venturi's are good)Riese

Waiting for those TYME VIDEOS!!

"No one, I repeat no one will have a lighter Tip Weight Box than me."
"Homer Simpson"

Those of us that have waited for months to get product and or engine work done appreciate your outstanding service.

Our Host Leonard Makes Venturies, just ask like I did my OS 20 S runs great with the new venturi.And fast service. SEE YA NEAL:)

>Our Host Leonard Makes Venturies, just ask like I did my OS
>20 S runs great with the new venturi.And fast service.
>SEE YA NEAL:)

You have one of the much sought-after 20FPs and dared to violate the BB T-U? I am aghast. Unless, of course, you specified a bore size even bigger than stock, in which case I am suitably impressed.

>>Our Host Leonard Makes Venturies, just ask like I did my OS
>>20 S runs great with the new venturi.And fast service.
>>SEE YA NEAL:)
>
>You have one of the much sought-after 20FPs and dared to
>violate the BB T-U? I am aghast. Unless, of course, you
>specified a bore size even bigger than stock, in which case
>I am suitably impressed.
>
>Dan

Uh.... Danny Boy,
I think the reference is to a 20 S, not FP.
You know, the old loop scavenged smaller version of the 35 S.
(just for you)
Bill <><

LAST EDITED ON Oct-17-04 AT 06:38 PM (CDT)
 
Scott R. has done a few jobs for me and they have all been superb. Quick dellivery, reasonable price, and overall great service! I will do some more business with Scott, very soon.

I have also received great items from Byron, Len, Randy Smith, Tom Lay, Tom H., Tom Dixon, and probably a couple other guys that I can't think of right now........

It's great to have a large number of good people who are willing to help us out with our little part of the hobby. Scott is one of them.

Bill <><

Thank you all. AS I'm retired at 47 because of a back injury; Making venturi’s and some other Control Lines stuff has been fun. This keeps me busy, and I enjoy all of the control line community. Thanks for all of your support.