Stuka Stunt Control Line Forum
Archive, 2000–2021 · recovered from the Internet Archive
Forums › Stuka Stunt Main Forum

Argus repairs.....

Stuka Stunt Main Forum · 14 of 14 known posts recovered

Bill Little · Nov 30, 2004 04:36 PM

edited#0 source
I decided to see if repairs would be practical for the Argus.
This is how far it has gone!
Bill <><

When the character of a man is not clear to you, look at his friends.
Japanese Proverb

pipemakermike · Nov 30, 2004 04:40 PM

#1 source
Have you got a "before" picture?

Bill Little · Nov 30, 2004 04:45 PM

edited#2 source
Hi Mike,
I am looking for that "before" file.
Bill <><

Found two

When the character of a man is not clear to you, look at his friends.
Japanese Proverb

pipemakermike · Nov 30, 2004 04:50 PM

#3 source
Very Pretty and I'm sure it will be again. What was the story on the crash?

Bill Little · Nov 30, 2004 04:56 PM

#4 source
First flight with a new engine...... went dead on the intersection of the square eight going up from inverted. Outboard wing was broke into 3 sections, and the fuse split in many places from front to back behind the wing. Hit right on the spinner, but the ground was soft, thank goodness it wasn't over pavement! LOL!!
Structure was sound after all, and the wing went back together without too many problems. So far, very little weight has been gained. I estimate about 1 oz of weight gain when completed. It was originally 37 oz. RTF with a Fox 35.
Bill <><

When the character of a man is not clear to you, look at his friends.
Japanese Proverb

LeagueCityRalph · Nov 30, 2004 05:08 PM

#5 source
>First flight with a new engine...... went dead on the
>intersection of the square eight going up from inverted.
>Outboard wing was broke into 3 sections, and the fuse split
>in many places from front to back behind the wing. Hit
>right on the spinner, but the ground was soft, thank
>goodness it wasn't over pavement! LOL!!
>Structure was sound after all, and the wing went back
>together without too many problems. So far, very little
>weight has been gained. I estimate about 1 oz of weight
>gain when completed. It was originally 37 oz. RTF with a
>Fox 35.
>Bill <><
>
>When the character of a man is not clear to you, look at his
>friends.
>Japanese Proverb

It was a gorgeous ship before; looks like it will be again. If you have a photo history, it should be submitted to Windy as a "Crash Repairs" article. I'm really impressed by anyone who has the patience to rebuild a severely damaged model!

Bill Little · Nov 30, 2004 06:50 PM

#12 source
Thanks Ralph,
I just pulled the engine and tank out and hung it back on the wall when I got home. There were about as many pieces as it had before I started cutting the wood and building! I was pretty dejected. It was a little more "special" to me than most of the planes I have built.
I just took it down a couple months later and started the repairs. Didn't take a picture of it in it's "broken state", just didn't think of it.
It will return!
Bill <><

When the character of a man is not clear to you, look at his friends.
Japanese Proverb

tomB · Nov 30, 2004 06:26 PM

#8 source
Wow - a buffed Veco spinner and an original old Top Flite prop - I'm drooling.

What's on that intake? Did you machine a scoop out of brass, and is there something with the "S"?

Sparky12366 · Nov 30, 2004 06:37 PM

edited#9 source
>Wow - a buffed Veco spinner and an original old Top Flite
>prop - I'm drooling.

Looks like a Froom spinner to me need one?

Bill Little · Nov 30, 2004 06:43 PM

#11 source
>Wow - a buffed Veco spinner and an original old Top Flite
>prop - I'm drooling.

It is an old Froom spun 2" that survived. It needed the polish job!

>What's on that intake? Did you machine a scoop out of
>brass, and is there something with the "S"?

Just an "S" that Steve put in his sometimes.
The front of the cowl opening has a thin gold outline. It is as close to the original as it could get. This is the '58-'59 version, not the one that Steve flew at the WC in '60. Very subtle differences.

Thanks!
Bill <><

When the character of a man is not clear to you, look at his friends.
Japanese Proverb

Sparky12366 · Nov 30, 2004 05:19 PM

#6 source
>I decided to see if repairs would be practical for the
>Argus.
>This is how far it has gone!
>Bill <><
>
>When the character of a man is not clear to you, look at his
>friends.
>Japanese Proverb

Looks like an exact copy of original.

Sparky12366 · Nov 30, 2004 05:20 PM

#7 source
>>I decided to see if repairs would be practical for the
>>Argus.
>>This is how far it has gone!
>>Bill <><
>>
>>When the character of a man is not clear to you, look at his
>>friends.
>>Japanese Proverb
>
>Looks like an exact copy of original. Very nice!

Bill Little · Nov 30, 2004 06:38 PM

#10 source
Thanks Robert,
I had a piece of silkspan from the original that had all the colors on it. I just built it as a memory of Steve and his designs. It is a very good flying Classic ship.
Bill <><

When the character of a man is not clear to you, look at his friends.
Japanese Proverb

iroquois · Dec 02, 2004 08:32 AM

#13 source
Bill, you're a brave man! Maybe I should try recovering mine.