Stuka Stunt Control Line Forum
Archive, 2000–2021 · recovered from the Internet Archive
Forums › Stuka Stunt Main Forum

The "Encore" is done

Stuka Stunt Main Forum · 13 of 13 known posts recovered

Michael Schmitt · May 19, 2006 10:40 AM

#0 source
This is a Allen Brickhaus design. It has a PA61 on a pipe. Its about 65 oz. Wing span 59.5, wing area 665 sq in, fuselage length 43.25
I used gold leaf on the nose and tail. Special thanks to Allen for another great design and Sina Goudarzi for help with the paint scheme.

Michael Schmitt

Jay Williams · May 19, 2006 11:20 AM

#1 source
Man Mike!

You are doing great work!


Jay Williams

3 Nails
1 Cross
-------
4 Given

Crist Rigotti · May 19, 2006 02:12 PM

#2 source
Very nice Mike. Hope to look it over in a few weeks.

Crist Rigotti
"A driver trying to be a pilot."
http://www.clguy.com

Randy Powell · May 19, 2006 02:33 PM

#3 source
Slick plane. I like it.

Tim McTigue · May 19, 2006 06:51 PM

#4 source
The gold is an especially nice touch! I love it! Any chance you can do a write-up on how it's done?

Tim

MAAC 65703

Michael Schmitt · May 19, 2006 09:05 PM

#6 source
Hi Tim

I found all the supplys at "Michaels". There are two types of adhesive for gold leaf. Brushable and spray. I thought spray would be the way to go. I was wrong, the leaf would move every time I picked the plane up. I removed it all and tryed the brush on type. I found it to work much better. I would mask an area off and brush on the adhesive. Remove the tape. Then place the thin gold leaf sheet over the area. Next I would use a one inch soft artist brush and burnish down the leaf. I would work the edges until it would break off and fly away. Then several layers of clear dope and sanding to smooth it out. Its not hard to touch up using the same method. I am helping Allen with a article for flying models. Which will cover building and flying the Encore.

Thanks for your interest

Michael Schmitt

rjalfadawg1 · May 19, 2006 11:55 PM

#7 source
Nice plane! I, too, like the gold leaf effect. I used it on my Green Box Nobler last year and got lots of positive comments. Just a hint, if you leave the tape on and do the leaf, then pull it back on itself, it will cut the leaf just like it does paint. Gives a nicer line for the leaf. Good job............RJ

Michael Schmitt · May 20, 2006 06:20 AM

#8 source
Very cool, I will try that on the next one.
Could you post a picture of your Nobler here as well?

Michael Schmitt

mugs914 · May 19, 2006 06:57 PM

#5 source
Beautiful!! Looks like a turtle deck Legacy. Very nice work!

God bless!

Mike Mulligan

DennisV · May 20, 2006 07:51 PM

RE: The#9 source
Mike,
Great looking airplane!!! I guess Mister Incredible, your Tempest, better start looking back over his shoulder to see if the Encore is coming .
Dennis

sina · May 20, 2006 09:41 PM

RE: The#10 source
Mike,

Nice plane as usual.

I hope one day I will have plane like this.
sina

Proparc · May 21, 2006 11:26 AM

#11 source
The Encore is essentially a Bob Hunt Genesis 46. You can't miss with that one.

Milton Graham\Proparc

Allen Brickhaus · May 21, 2006 05:39 PM

#12 source
Yes, the heritage of the Buccaneers, Scepters, Legacys and now the Encore are of the lineage of the Genesis line. Very respectable model with tweaks to satisfy the desires of myself and the modelers I am attempting to reach. Walter Umland and I were in discussions of kitting the Encores (665 and 555 square inches) in his line of models before the decided to get out of the business. Hope Michael enjoys the flight characteristics.

[photo not recovered: 434d8ba368dd7b9c.jpg]

Allen Brickhaus