Stuka Stunt Control Line Forum
Archive, 2000–2021 · recovered from the Internet Archive
Forums › Stuka Stunt Main Forum

What prop - VECO 19 ?

Stuka Stunt Main Forum · 9 of 9 known posts recovered

Bob B · Mar 11, 2004 07:13 PM

#0 source
I have a VECO 19 I thought I would put on an ARF Flight Streak. What prop would be a good choice? What RPM does this engine like to operate at? Thanks for considering this amateur question.

Bob

PS What engine do you men like on the ARF Flight Streak?

Jim T. · Mar 11, 2004 08:03 PM

#1 source
I suspect a 9 x 5 APC would do fine.

Jim

Brett Buck · Mar 11, 2004 08:14 PM

#2 source
>I have a VECO 19 I thought I would put on an ARF Flight
>Streak. What prop would be a good choice? What RPM does
>this engine like to operate at? Thanks for considering
>this amateur question.
>
>Bob
>
>PS What engine do you men like on the ARF Flight Streak?

10-4, or 9-4, run in a 2-stroke.

Brett

sq8s · Mar 14, 2004 06:38 PM

#3 source
What size venturi/NVA would be what I need for the R/C 19? I have a fresh one.15% nitro& 25% castor? thanks Scott PS I dont make hyflo mufflers fof this one:7

Bill Little · Mar 14, 2004 06:57 PM

#4 source
LAST EDITED ON Mar-14-04 AT 06:59 PM (CDT)
 
If it is the BB later version, I agree with Brett. I found mine likes an old Top Flite 9-4,. Sig 10% nitro. Would probably like the APC 9-4, I need to get a couple of those.
Bill <><

Just an Old Advanced flyer.

sq8s · Mar 15, 2004 07:38 PM

#5 source
If anyone knows what size NVA/venturi please share it with me.I have the prop&fuel thanks!

gcb · Mar 16, 2004 05:22 PM

#6 source
I converted a Veco .19 and used the needle valve assembly that was in the carb. Apparently they used common parts for RC and CL. Perhaps other versions used a different carb.
For a venturi I fashioned one from a nylon electrical spacer (3/8" OD, 1/4" ID I think). This was a few years ago so I could be wrong.
I would suggest getting a venturi from our host. You may also be able to get them from K&B.
Good luck with it.

George

Bill Little · Mar 16, 2004 06:31 PM

#7 source
>If anyone knows what size NVA/venturi please share it with
>me.I have the prop&fuel thanks!

Scott,
I just measured my stock one. Approx. .210-.215 venturi, .155 NVA
Don't have the *best* caliper in the world, only goes to .01!
HTH
Bill <><

Just an Old Advanced flyer.

ELee · Mar 16, 2004 08:54 PM

#8 source
I bought a couple of VECO 19 venturi from Frank Bowman.