It comes in any width roll that you want and cost about $2.00 an inch (roll width) it's like a giant roll of masking tape but not as sticky. The roll I bought is about 18 inches wide and covers the whole wing. It comes in different tack types (low tack, medium tack etc.) I bought low tack.
The paper is thinner than regular masking tape so it cuts real easy with a hobby knife. You can draw on it with a pencil as well as erase and peels off easily after you spray your design.
I tried out (The City Smashers) Minwax stuff on a practice model and used the Transfer Right to lay down a flame job, it works excellent. I'll post a photo when the clear dries.
Good Stuff, for you appearance point guys.
You can purchase it through a company called Ameriban.
http://www.ameriban.com/
Call (800)654-8405 to request a copy of there catalog.
It's Transfer tape that is used to transfer Vinyl Banner lettering onto signs. It's NOT as sticky as masking tape so it's easy to peel off.
Here are a few pictures, This model hasn't been buffed out yet.
http://home.bellsouth.net/p/s/community.dll?ep=16&groupid=141720&ck=
Broken Wings
