Stuka Stunt Control Line Forum
Archive, 2000–2021 · recovered from the Internet Archive
Forums › Stuka Stunt Main Forum

Gasket paper

Stuka Stunt Main Forum · 4 of 4 known posts recovered

kenwstr · Mar 25, 2004 04:09 PM

#0 source
Hi

My taipan 15 has a torn sleave gasket, runs fine with it. Been that way for years and performs very well. Now I have the engine apart a I would like to replace the torn gasket. What can I use to make a new paper gasket. The old one measures .2 mm thick.

Regards,
Ken

T.Durrill · Mar 25, 2004 04:16 PM

#1 source
A playing card makes a good gasket, but if you are more picky, you can go to an auto parts store and pick up regular auto paper gasket material which works very nicely. ............. TD

ash · Mar 25, 2004 08:12 PM

#2 source
My Taipan 3.5 sports a cereal box gasket in that position. I also had a aluminium spacer in there to raise the timing one upon a time...

On my bikes (Honda NSR250s) I sometimes use 200g blotting paper for the cylinder base gasket. Cut out the gasket shape, soak it in dope and let it dry flat to make a sealed fibre paper gasket almost as good as the real thing.
A.

--Welcome to the only sport where dope is not only legal, but often recommended!

sabre250 · Mar 26, 2004 09:03 PM

#3 source
I will give you a new gasket set for the Taipan. Contact me off line please.