Tornado 3 blade Props

Hi,

Jim Armour is trying to obtain Tornado Three (3) blade, 10X4
propellers in the black format.
Since he does not have a computer at his disposal, you can
contact him at 310-371-7630 (PST)

If anybody finds these props, please let me know they were found.
I have been lookin' for a while.......
Thanks Gil

GO To http://www.grishproducts.com/

The last couple of years, the on-site software may take an order, but your chances of actually RECEIVING anything are negligible. They only have a very limited number of molds that are still usable, and never seem to get around to replacing the rest.

>GO To http://www.grishproducts.com/

You can try. It's most likely a waste of time.

.

Kiwi

I recently managed to get a couple of the black 1/2 A props and a couple of the grey 10X4 3 blade props so they do have some stuff. The black Magnum 3 blade props were listed as backordered.
Steve
The older I get, the better I used to fly!

The last time this came up, I thought someone said they were re-doing all their molds.

Anyway, I have quite a few of these black props in 10 and 11 inch 4 and 5 pitch and also a couple of the three blades.

Of all of them the three blade looks to have a good mold. THe others were pretty rough around the hub. All of the blades look ok tho.

Curt

No, the three blades are not for sale. I actually thought of molding some of these in CF. Its on the project list but down a ways.

Did anyone check the $$prices$$ at the Grish website? About $10.50 for one 10-4 three blade prop!!!!!!!

There packs of two

Thank you all (Especially Greg).
I'll pass on the information to Jim.
I'm sure he'll appreciate it.