Can be converted to Ukie, ENYA . 35 R/C

LAST EDITED ON Jan-03-04 AT 12:05 PM (CDT)
 
This is an Enya .35 R/C, model 5224, from the past but can be converted to Ukie. Requires machine shop equipment.... at least a lathe. $25
Added comment 01-03-2004: Parts may still be available to convert to Ukie from MRC in New Jersey
E-Mail anytime [email protected]

I'm curious as the amount of machine work necessary to convert these to C/L'
If it is a matter of a venturi either the square or round type, they are readily available from Altech,needle valve assemblies are likewise available. Our host sells tongue mufflers for them either strap on or bolt on if the motor has the ears in the exhaust to drill and tap. Low compression heads and gaskets are likewise available.
Having just about every incantation of these motors I'm puzzled and would like to know. Thanks, Dennis

Conversion is just a matter of removing the carb and replacing with a venturi and needle assembly. All available from MRC in New Jersey. There doesn't appear to be any machine work necessary.