Wanted- - Eng. test stand by>"Sheldon Eng."

I'd like to buy a test stand manufactured by Sheldon Eng.U.S.
from memory they were machined from solid alloy block.
If anyone's got a new or used one,let me know.
RON.

If that is not available , or you are unsuccessful in gettting one then I think that Jett Engineering sells a solid aluminum test stand for around $50.00

I have a large aluminum Tatone test stand that Brodak sent me by mistake. This is the large, adjustable, cast aluminum stand suitable for engines of .30 to 1.3 cu inch size. Still sealed in the package. List price is $31.20. I will sell it for $22.00 plus $3.50 shipping (US).

Leonard,
Thanks for your reply on the eng.stand if nothing comes up I,ll seriosly give yours some thought.
regards,Ron

denlip
Thanks for the reply,where can I contact jett eng.for the
eng.stands have they got a web/email? I'm over here in Australia.
Ron.

Please be aware that the Jett units are sized specifically for his engines and are not adjustable.
http://www.jettengineering.com/
Derek Moran

Derek,
Thanks you saved me an email to jett!

Len:

I'd like to buy the test stand. Let me know if or when it is available. Gary

I use one of the large Tatone mounts on my own test stand. You might want to replace the flat washers under the clamp nuts with spherical washers. Also, Fox .35's are kinda awkward to clamp because of interference from its backplate bosses.
Derek Moran