Stuka Stunt Control Line Forum
Archive, 2000–2021 · recovered from the Internet Archive
Forums › Classifieds

Wanted: Fox and Johnson parts

Classifieds · 9 of 9 known posts recovered

sabre250 · May 30, 2004 10:44 PM

#0 source
I want to fly my older engines and I do need some parts. I'm in Australia, but to make it easier, I can pay in US$ notes and the parts can be mailed to a friend in Texas. Any assistance would be much appreciated.
*for later model Fox .19/.25 Stunt:
#12531 venturi, #90222 muffler
*for Fox Falcon .60:
#15901 or 25901 crankcase, #15908 crankshaft
#13509 thrust washer, #13513 prop washer, #13512 prop nut
#14010 needle valve assembly, #15931 or 15932 venturi
*for small case Johnson .32:
crankcase and gasket set
with best regards


David Owen

Dankar · May 31, 2004 09:44 AM

#1 source
Dave, you may have better luck by stating what engines these are for. Try Fox they may have parts. Good luck,Dan:7

sabre250 · May 31, 2004 10:48 PM

#2 source
>Dave, you may have better luck by stating what engines these
>are for. Try Fox they may have parts. Good luck,Dan:7

Hi Dan. Thanks for your reply - the only one!
I will rehash the ad to make it a little clearer. Also check Fox. Thanks for he tips.
regards
Dave

David Owen

sabre250 · May 31, 2004 10:55 PM

#3 source
>I want to fly my older engines and I do need some parts. I'm
>in Australia, but to make it easier, I can pay in US$ notes
>and the parts can be mailed to a friend in Texas.
I am looking for:

>#12531 venturi, #90222 muffler to suit later model Fox 19/25 Stunt

>#15901 or 25901 crankcase, #15908 crankshaft, #13509 thrust washer, #13513 prop washer, #13512 prop nut, #14010 needle valve assembly, #15931 or 15932 venturi to suit a Fox Falcon .60

>a crankcase and gasket set to suit a small-case Johnson .32

would appreciate any help
>with best regards
Dave


(that should make it clearer, Dan)

David Owen

Bigiron13 · Jun 02, 2004 07:51 PM

#4 source
David, I have the 25/19 venturis and the 14010 NVA. Are the thrust washer,front washer and nut for a Fox stunt 35?? I couldn't get you a reply as I was having some upgrading done to the computer.

If the washers and nut are for the Fox stunt 35, I have those also.

Bigiron

Bigiron13

sabre250 · Jun 02, 2004 11:09 PM

#5 source
> David, I have the 25/19 venturis and the 14010 NVA.
If the washers and nut are for the Fox stunt 35, I have those also.
> Bigiron

G'day Bigiron,
Thanks for looking up those parts for me.
The pw,pd,pn are the same as a 35 (same part number anyway), but they are the heavy, large diameter, black washers. Not the later small dia ones. The prop driver is about 3/16" thick and has a groove around it.
with regards
Dave

David Owen

Bigiron13 · Jun 03, 2004 09:20 AM

#6 source
Sounds like you are trying to find parts for the old square venturi 35s and 36s.. I don't think that I have any spares of those. I will look and get back sometime today.
I have the NVA and 19/25 venturis. They do not have the NVAs in them. they are the venturi only. They are two different part numbers for the 19 and 25, so I would guess that they are different sizes.
Bigiron

Bigiron13

sabre250 · Jun 03, 2004 05:31 PM

#7 source
Bigiron

>trying to find parts for the old square venturi 35s and 36s.

I think the Falcon 60 did use the same prop drive assembly as the contemporary 29/36 engines. The part number I gave is correct, and obviously relates to the smaller engines, so these would be fine if you have them.

> I have the NVA and 19/25 venturis. They do not have the NVAs in them. They are the venturi only.

I have the needle valve assemblies, so only need the venturis,thanks

> two different part numbers for the 19 and 25, so I would guess
that they are different sizes.

The 19 size is probably 11931 and the 25 is 12531. I'm looking for one of each if possible.
Also looking for a 13510 .35 nva, or a 13516 needle only, just in case you have these.
with thanks and regards
Dave

David Owen

Bigiron13 · Jun 04, 2004 10:16 PM

#8 source

David, I have rhe following:

Venturi PN 12531 For the Fox 25
Venturi PN 11931 For the Fox 19
Needle Valve Assembly PN 14010 For several Different Fox engines
Thrust Washer PN 13509 Used, taken off an old engine
Front washer PN 13513 Used same as above
Prop Nut PN ? taken off same engine as the above two items
Needle valve body, spring clip and nut PN 13532
Needle valve pn 13517

The last two items are for the Fox stunt 35.

I do not have the muffler PN90222
The venturis PNs 15935 or 15932
The crankcase pn 15901 nor the crankshaft PN 15908

I do have a complete Falcon 60 that is like new condition. It appears that it has never been run (other than at the factory. One of the mount lug holes appears that it has been mounted but the others do not appear to have ever had mount bolts in them. I believe the engine is like new.
If you are interested in any or all, drop me a direct E-Mail at [email protected] and we will discuss prices and where to ship.

Bigiron13 aka Marvin Denny

Bigiron13