Looking for 25 FP

LAST EDITED ON Jul-23-04 AT 06:59 AM (CDT)
 
Anyone have a used 25 FP that they might want to dispose of? Like the muffler, too, if possible. Thanks! GOT TWO! THANKS,GUYS!!! Please close, Leonard.

There have been a lot on the bay in the last few weeks. Got one for
40.00 new in the box.

Walter:+

by any act, error, or omission, I have, intentionally or
unintentionally, displayed any breedist, disciplinist, sexist, racist,
culturalist, nationalist, regionalist, localist, ageist, lookist, ableist,
sizeist, speciesist, intellectualist, socioeconomicist, ethnocentrist,
phallocentrist, heteropatriarchalist, or other violation of the rules of
political correctness, known or unknown, I am not sorry and I encourage you
to get over it.

You can also consider the TT25GP as it's a clone of the OS25FP. Most of the parts are interchangable and best of all the motor is still available at a very reasonable price. Think that our host modifies them for a better run also. Dennis

> by any act, error, or omission, I have, intentionally or
>unintentionally, displayed any breedist, disciplinist,
>sexist, racist,
>culturalist, nationalist, regionalist, localist, ageist,
>lookist, ableist,
>sizeist, speciesist, intellectualist, socioeconomicist,
>ethnocentrist,
>phallocentrist, heteropatriarchalist, or other violation of
>the rules of
>political correctness, known or unknown, I am not sorry and
>I encourage you
>to get over it.
>
>You can also consider the TT25GP as it's a clone of the
>OS25FP. Most of the parts are interchangable and best of all
>the motor is still available at a very reasonable price.
>Think that our host modifies them for a better run also.
>Dennis

Talk about 'covering your bases'...man...this about covers it all!

IMO, I also think the TT GP .25 is a good engine to consider. Its sleeve's nickel plating is supposedly three times thicker (and harder nickel) than that of the OS FP series if you buy into the 'sales talk' by TT when the OS FP series was still available. Quantum Models has the TT GP .25 for $49.99 + shipping (order $100 or more and get FREE shipping). Also, the TT has a three year warranty. Quantum can get the TT GP .25 venturi (a 'true' venturi) for ~$4 and the PRO .46 NVA is the only one still available, it's about $6. Put a couple washers on each side and it works fine. I use a PRO .46 NVA on a GP .15, GP .25 and a PRO .36 with excellent results...just add washers on each side as needed to center it.

Of course if you can get a NIB OS FP .25 for $40 that might have to be considered, too. If it is the R/C version expect to pay ~$20 for the C/L conversion parts though.

Decisions, decisions???

Eugene S. Chernosky
AMA 639635

HI Bill. I have one you can have for 35.00. I'll make sure it has the muffler. Contact me at 256-880-1390 or on here in the private message section. Ty M.

I have an OS Max 25 BB engine almost brand new. I bought this on ebay brand new and ran it about 20 flights. I tightened the engine mounting bolts too tight and cracked the crank case. I have been watching ebay for a worn out engine with a good crankcase that I can use to make a good engine using my parts but I have not found one yet. I really hate to sell this engine because it was such an excellent running engine. If you would like to have it I will take $25.00 plus postage. Or.... if you would like to sell your crankcase let me know.

LAST EDITED ON Aug-14-04 AT 00:01 AM (CDT)
 
Bill,
I sent the muffler out of a new FP25. - I forgot to send the screws - - sorry - but you should like the price.