Need Control Line Vent or Speed Vent for ST G-21,

Hi There: Merry Christmas to all. I'm in need of a stunt vent or speed vent for the Super Tigre G-21, .29 size. Either rear vent stack or front intake will work. This is a new engine built completly of new in package parts by the mill wizard: Frank Bowman, of Farmington, New Mexico, and the engine needs only a vent to top it off. Cash, or trade any cl parts or engine parts. Regards, William

I do believe that I have a stock venturi of the type you are requesting. It has one big hole in it and is set up to be run on pressure. Is this the one?

Hi There, Yes this is the one. Send me a pm with payment directions. Thanks abunch! ([email protected]). William

William, send me a email. Its the only way I can respond to yours.

LAST EDITED ON Dec-17-03 AT 03:57 PM (CST)
 
I may have some also. Mine have very little metal around the edges and is set up for the standard venturi/needle valve location. Faint part number is 02320436. I am not sure about the last two digits, the 3 and the 6. I have five of these. The opening is way to big for stunt. The packages state that they are for G21/ .29 to .46.

Hi There: thanks to all for the response. I'm going with Allen here for the vents. I could not hook up with "crashtoomuch" who offered first, because of email problems with my server here in New Mexico, but thanks anyway and a big Merry Christmas to all STUNTERS and family. William

Hi Allen: 12/14/04: The ST factory did build a "larger" vent for the G-21 .29. It was a FI version only and that is why my RV intake port hole is smaller. Just fit the ones I got from you in a front end versions. So, the labeling was almost correct. I can use the ones sent though on other projects in the future. Regards, William

FOUND VENTS, THANKS!

THANKS CRASH2MUCH!