Veco venturi insert

I just received a Veco 35 series 100 that was run on hard tank pressure at one point and the venturi restrictor was missing. I'd like to run it on suction; would anyone happen to have a spare available? Thanks.
Steve

Just poked around in my "whatzit" collection and think I actually have a Veco 35 Venturi insert!
Large OD is Approx 17/32 diameter, 1/4" ID and the spray bar hole is a tad short of 7/16ths down and drilled for a 5/32 spraybar.
The taper (goes into engine) is .428 to .342 dia. and then straight.
Check your Veco & if this sounds like it fits lemme know.
If it works for you, I'll send it to you. (keep em flyin)

Vince

Thanks Vince. I'll check it tonight.

Hi Vince,

The dimensions I could check sound right. The step on the spraybar is 5/32" and the outer diameter of the venturi is 17/32". I'd like to have your insert. What can I offer you in return? You can email me at [email protected]. And I thank you very much!