Just bought a quart of Morgan 20% fuel, the label sais 16% oil how much castor should I add to use in my .049's?
Thanks
Dwayne
Keep a handle on em!
Thanks
Dwayne
Keep a handle on em!
Morgan car feul
Stuka Stunt Main Forum · 5 of 5 known posts recovered
Bill Adair · Jul 12, 2008 01:36 PM
#1 sourceDwayne,
Got to this web page, and plug in the numbers.
http://www.nitrorc.com/default2.asp?Introduction=http://www.nitrorc.com/fuelws
First scroll down to the bottom of the first page and select "Add Oil Only", if that is what you want to do.
That will take you to the next page where you enter the other variables, such as container size, original oil content, desired oil content, and original nitro content. The calculation will show the resulting changes in oil and nitro content.
I've bookmarked that site, as it's very handy.
Bill
Got to this web page, and plug in the numbers.
http://www.nitrorc.com/default2.asp?Introduction=http://www.nitrorc.com/fuelws
First scroll down to the bottom of the first page and select "Add Oil Only", if that is what you want to do.
That will take you to the next page where you enter the other variables, such as container size, original oil content, desired oil content, and original nitro content. The calculation will show the resulting changes in oil and nitro content.
I've bookmarked that site, as it's very handy.
Bill
>Dwayne,
>
>Got to this web page, and plug in the numbers.
>
>http://www.nitrorc.com/default2.asp?Introduction=http://www.nitrorc.com/fuelws
>
>First scroll down to the bottom of the first page and select
>"Add Oil Only", if that is what you want to do.
>
>That will take you to the next page where you enter the other
>variables, such as container size, original oil content,
>desired oil content, and original nitro content. The
>calculation will show the resulting changes in oil and nitro
>content.
>
>I've bookmarked that site, as it's very handy.
>
>Bill
Kewl Thanks!
Dwayne
Keep a handle on em!
>
>Got to this web page, and plug in the numbers.
>
>http://www.nitrorc.com/default2.asp?Introduction=http://www.nitrorc.com/fuelws
>
>First scroll down to the bottom of the first page and select
>"Add Oil Only", if that is what you want to do.
>
>That will take you to the next page where you enter the other
>variables, such as container size, original oil content,
>desired oil content, and original nitro content. The
>calculation will show the resulting changes in oil and nitro
>content.
>
>I've bookmarked that site, as it's very handy.
>
>Bill
Kewl Thanks!
Dwayne
Keep a handle on em!
>Just bought a quart of Morgan 20% fuel, the label sais 16%
>oil how much castor should I add to use in my .049's?
>Thanks
>Dwayne
>
>Keep a handle on em!
While you do your calculating, just remember that Morgan mixes his fuel by weight, not by volume. so the amount of oil is several percent less actually.
>oil how much castor should I add to use in my .049's?
>Thanks
>Dwayne
>
>Keep a handle on em!
While you do your calculating, just remember that Morgan mixes his fuel by weight, not by volume. so the amount of oil is several percent less actually.
Leonard Neumann
Indianapolis, Indiana, USA
Indianapolis, Indiana, USA
>>Just bought a quart of Morgan 20% fuel, the label sais
>16%
>>oil how much castor should I add to use in my .049's?
>>Thanks
>>Dwayne
>>
>>Keep a handle on em!
>
>While you do your calculating, just remember that Morgan mixes
>his fuel by weight, not by volume. so the amount of oil is
>several percent less actually.
Thanks Len I did the calculation for 14% and added 4 oz of oil wich should give me about 22%.
Thanks again
Dwayne
Keep a handle on em!
>16%
>>oil how much castor should I add to use in my .049's?
>>Thanks
>>Dwayne
>>
>>Keep a handle on em!
>
>While you do your calculating, just remember that Morgan mixes
>his fuel by weight, not by volume. so the amount of oil is
>several percent less actually.
Thanks Len I did the calculation for 14% and added 4 oz of oil wich should give me about 22%.
Thanks again
Dwayne
Keep a handle on em!