Wanted: Veco or PA 1 3/4" 3-blade Spinner

Looking for a good used or new 1 3/4" Needle Nose type 3-blade spinner from Veco or PA.

Thanks, Joe

Believe it or not! I might actully have one or resonable facsimile. Let me root through the junk & if I find one it's yours.

> Believe it or not! I might actully have one or resonable
>facsimile. Let me root through the junk & if I find one
>it's yours.
>

That would be great. just let me know [photo not recovered: sipcof.gif]

>> Believe it or not! I might actully have one or
>resonable
>>facsimile. Let me root through the junk & if I find
>one
>>it's yours.
>>
>
>That would be great. just let me know

If our friend over there hasn't got one let me know. I have the template for turning the Veco style 1 3/4" spinner. I have to make one so a second one isn't that much more trouble.

HH in OZ

I'm waiting...

The bad news is it's not Veco , not 3 blade,, good news is it's PSP , 2 blade.. and never used.

> The bad news is it's not Veco , not 3 blade,, good news is
>it's PSP , 2 blade.. and never used.


I'm not too familiar with the PSP spinner, is it a needle nose type?

If PSP is referring to PRO STUNT PRODUCTS it like as not a clone of the PA spinners.


Ward

Pro Stunt Products, needlenose, 2 blade ,,let me know if you can use it

Joe, this is the same profile as the Keil Kraft (plastic) or Veco (alloy) 1 3/4" needle nose spinner. 2 or 3 blade, whatever you want to cut in it.

HH

Attachment #1, (jpg file)

>Joe, this is the same profile as the Keil Kraft (plastic) or
>Veco (alloy) 1 3/4" needle nose spinner. 2 or 3 blade,
>whatever you want to cut in it.
>
>HH
>
>
>

Hi Dallas,
That looks pretty good! Just curious what does the back plate looks like?

>>Joe, this is the same profile as the Keil Kraft (plastic)
>or
>>Veco (alloy) 1 3/4" needle nose spinner. 2 or 3
>blade,
>>whatever you want to cut in it.
>>
>>HH
>>
>>
>>
>
>Hi Dallas,
>That looks pretty good! Just curious what does the back plate
>looks like?

Hi Joe. What do you want the back plate to look like?! Generally flat plate of around 2mm thick to prevent bending. A raised drive washer about 0.75mm high and knurled for prop grip. Drill holes in back plate to save weight but in reality, how much weight would be saves at the expense of strength. I leave my spinners with a solid back plate.

HH

> Pro Stunt Products, needlenose, 2 blade ,,let me know if
>you can use it


Sounds good. I could certainly use it. Thanks John.

>> Pro Stunt Products, needlenose, 2 blade ,,let me know
>if
>>you can use it
>
>
>Sounds good. I could certainly use it. Thanks John.


PM sent

HH

Joe, email your address & I'll get it to you ,,