1)RSM Laser Cut Derringer kit. I started this and screwed up the fuselage sides, I was able to piece one side back together to cut out new ones but they're 1 piece and won't fit in the box. The one that was pieced back I rebroke and put in box so can be used for a pattern. Engine crutch is assembled and ribs punched out.I made new thicker 3/32?? Ribs R-5 and R-6 probobly for LG supports(included) Fuselage Stick and Stab supports will need replaced along with fuse. doublers.Hardware, canopy, plans, rest of the stick and wood is there. This list's for 179.00 will sell for 80.00 + 10.00 for shipping. AS-IS I can send pictures if requested.
2) RSM Mark 1 Profile Trainer 25-35 engines. This is the older hand cut version. Needs fuselage. The plans,stick,aluminium gear,fuse doublers are there. As far as I can see the fuselage is the only missing part. This kit has Dirrections from RSM provided.
This listed for about 60.00 when it was new, the new version is 90.00
asking 30.00+5.00 for shipping. AS-IS I can send pictures if requested.
2) RSM Mark 1 Profile Trainer 25-35 engines. This is the older hand cut version. Needs fuselage. The plans,stick,aluminium gear,fuse doublers are there. As far as I can see the fuselage is the only missing part. This kit has Dirrections from RSM provided.
This listed for about 60.00 when it was new, the new version is 90.00
asking 30.00+5.00 for shipping. AS-IS I can send pictures if requested.
Leester